New Scheduled Scan

1. While viewing the Scheduled Scans window, click New Scheduled Scan. The New Schedule Scan window displays.
2. Complete the fields referring to the information below.
3. When all selections/entries are made, click Run.

Scheduled Scan Fields

Field Description
Name Name of the scan.
Probe

The required probe. For a list of all probe types, refer to the section below.

Client

Name of the Client, which can be selected in the drop-down list.

IP Range

Specifies an IP Range to include in the scan. Click the icon to scan the entire subnet mask of the corresponding IP address.

When adding an IP address, the IP range can be specified in various formats:

192.168.48.1 (Single IP)
192.168.48.1 192.168.49.2 (Multiple IPs of Different Subnets)
192.168.48.1,2,3,4 (Multiple IPs of Same Subnet)
192.168.48.1-50 (A wide Range of IPs in a Subnet)
192.168.48.0/24 (Single Subnet/CIDR Notation)
192.168.48.0/24 192.168.49.0/24 (Multiple Subnets/CIDR Notation)

Exclude IP Range

Specifies an IP Range to exclude from the scan (optional). See IP Range, above, for a list of valid formats.

Location

The location (path) for the Certificate. Click the plus + sign.

Send Scan Report to

Users to whom the report should be sent. Click the plus + sign and select the applicable users. An email is sent to the user that the scan report is available.

Immediate

Select if the scan should be run immediately instead of adhering to a schedule.

Scheduled

Select if the scan should run at a set interval. Refer to Scan Frequency.